HobbyKing
HOBBYKING 929MG METAL GEAR SERVO 2.2KG/ 12.5G/ 0.10SEC
Model | HK-CS929MG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 200mA / 240mA |
Stall Torque | 2.0kg.cm /2.2kg.cm |
Weight | 12.5g |
Dead Band | ≤3uSec |
Ball bearing | MR85 |
Gear | Metal |
Connector wire | 215mm |
Operating Temperature Range | -20J+60J |
Operating Speed:, 0.12sec.60º/ 0.10sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
HobbyKing 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec5 Reviews
HobbyKing
MICRO LIGHT AIRCRAFT 2.4GHZ AIRPLANE W/ 2.4GHZ READY-2-FLY
Wingspan | 500mm |
Length | 396mm |
Height | 131mm |
Flying weight | 65g |
Motor | N50 |
Specifications:, Battery:, 2S 7.4V 180 mAh Li-Po, *Note:, This model now includes a USA style two prong wall plug for charger (see photo).,
Micro EPP light aircraft 2.4Ghz Airplane w/ 2.4Ghz Tx Plug-n-Fly ...5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 35-36A 910KV / 350W
Model | NTM Prop Drive 35-36A 910 |
Turns | 10T |
Max current | 38A |
Rated Power | 350w |
Shaft | 4mm |
Weight | 117g |
Bolt holes | 18.9mm & 25mm |
ESC | 30A |
Cell count | 3S Lipoly |
Suggested Prop | 10x4 |
Efficiency | 83% |
Kv: 910rpm/v, Bolt thread: M3,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
SCM 3213 1250KV BRUSHLESS OUTRUNNER
Battery | 2-3 Lipoly |
Max Eff | 82% |
Max Current | 7 to 10A (over 75% efficiency) |
Int. Resistance | 125mohm |
10v no Load current | .7A |
Dimensions | 25.7 x 26mm |
Shaft | 3mm |
Weight | 45g |
Model Size | up to 300-600g |
Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 1250rpm/v,
Spec.5 Reviews
HobbyKing
TURNIGY CA80-80 BRUSHLESS OUTRUNNER (50~80CC EQ)
Model | 80-80-10 |
Resistance | 0.011ohm |
ESC Required | 200A |
Input Voltage | 30~50V |
Weight | 1545g |
Shaft | 8mm |
Non Load Current | 6.0A at 20V |
Equivalent | 50-80cc Gas Engine |
Kv :160 rpm/V, Dimensions:, 152x133x81mm (Including Mount),
Designed as a 50 to 80cc gas engine replacement, this ...5 Reviews
HobbyKing
DIGITAL HIGH TORQUE BEARING SERVO 12G/2.6KG/.16SEC
Model | HD-1581HB |
Voltage | 4.5v~6v |
Speed | .16sec |
Torque | 2.6kg/cm |
Bearings | 1BB |
Gears | Nylon |
Weight | 12g |
Size | 22.8x12x25.4mm |
5 Reviews
HobbyKing
GWS FAIL-SAFE
Model | FS-1 |
5 Reviews
HobbyKing
HITEC HS-485HB DELUXE SERVO 4.8KG/45G/0.22SEC
Applications | Helis and Aircraft up to 72 or up to 12lbs when using just one servo per control surface. |
Motor Type | 3 Pole |
Bearing Type | Top BB |
Speed @ 4.8v | 0.22 sec @ 60 deg. |
Speed @ 6v | 0.18 sec @ 60 deg. |
Torque @ 4.8v | 4.8 kg.cm |
Torque @ 6v | 6 kg.cm |
Size | 39.8 x 19.8 x 38mm |
Weight | 45g |
Features:, Note:, Be aware that high vibration gas (not glow) engines combined with large contol surfaces and large thows (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs., Warning:, Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail., Specifications:,
Hitec HS-485HB Deluxe servo 4.8kg/45g/0.22sec HS-485HB updates the very popular ...5 Reviews
HobbyKing
GWS 8CH DUAL CONV 40MHZ FM RECEIVER
Model | GWRXS001 |
Channels | 8ch |
System | FM (PPM) Dual Conversion |
Voltage | 4.8~7.2v |
Current Drain | 10mA |
Weight | 22g/.78Oz |
Size | 65x25x15.5mm |
Range | 600mtr+ / 2000ft |
Adjacent channel rejection | better than 65dB at ?10k Hz |
Image rejection | better than 65dB |
Spurious rejection | better than 80dB |
nter modulation | better than 65dB |
Sensitivity : 1,
GWS 8ch Dual Conv 40mhz FM Receiver Whole new designed, ...5 Reviews
HobbyKing
POWER HD 3688HB DIGITAL SERVO 25G/2.8KG/.07SEC
Model | HD-3688HB |
Voltage | 4.5v~6v |
Speed @ 4.8V | .08sec |
Speed @ 6V | .07sec |
Torque @ 4.8V | 2.3kg/cm |
Torque @ 6V | 2.8kg/cm |
Weight | 26g |
Size | 35.5x28.6x15mm |
5 Reviews
HobbyKing
HOBBY KING GT-2 2.4GHZ RECEIVER 3CH
Model | Car/Boat |
Channels | 3ch |
Frequency band | 2.4Ghz |
Modulation | GFSK |
Sensitivity | 1024 |
RF. receiver sensitivity | -100dbm |
Fail Safe | Yes |
Power | 4.5~6VDC |
Antenna length | 26mm |
Size | 37.6 x 22.3 x 13mm |
Specification:, Weight:5g,
Hobby King GT-2 2.4Ghz Receiver 3Ch CE & FCC certified5 Reviews
HobbyKing
ALTITUDE MICROSENSOR (STANDALONE OR E-LOGGER) V4
http | //www.eagletreesystems.com |
*Note | This is the V4 model |
5 Reviews
HobbyKing
TURNIGY 1370A SERVO 3.7G/0.4KG/.10SEC
Model | TGY-1370A |
Speed | 0.10sec |
Torque | 0.4kg/cm |
Weight | 3.7g |
Size | 20x17.6x8.0mm |
Voltage:6v,
Micro analog servo. Precise, jitter free response for small parkflyers ...5 Reviews
HobbyKing
TURNIGY NANO-TECH 460MAH 3S 25~40C LIPO PACK
Discharge Plug | Mini-JST |
Suited to the following models | HIROBO SRB Quark SG |
: 460mAh, : 3S1P / 3 Cell / 11.1V, : 25C Constant / 40C Burst, : 45g (including wire, plug & case), : 67x30x15mm, : JST-XH,
More than just a fancy name. TURNIGY nano-tech lithium polymer ...5 Reviews
HobbyKing
POLYQUEST 4350MAH 5S 25C LIPOLY
Capacity | 4350mAh |
Cell Model | PF 7443150XP |
Voltage | 18.5V |
Charge Current(2C) | 8.7A |
Continous Dis.(25C) | 108.75A |
Dimension(mm) | 175.0 * 48.0 * 39.0 |
Weight | 559g |
http | //www.enerland.com/ |
5 Reviews